Diagrams to re-hinge the swing door on foodservice units
1. Remove door on cabinet.
2. Remove hinge base on cabinet.
3. Remove lock strike on cabinet.
4. Plug all existing holes with hardware provided.
5. Drill #16 (.1770 diameter) holes and tap #12-24 as per dimensions for hinges only.
6. Using screwdriver, remove nylon pivot cam.
7. Rotate cam 180 degrees.
8. Insert cam into hinge base.
9. Install hinge base on cabinet using existing hardware.
10. Invert hinge on door
11. Mount door on cabinet.
12. Use template to locate new holes for lock strike.
13. Mark hole locations on cabinet.
14. Drill holes as per dimensions.
15. Mount lock strike using existing hardware.
|
|
